Mercury 25 2-Stroke, Руководство пользователя

Страница: 78 / 123

OPERATION
70
5. When the engine starts, release the key, and it will return
automatically to the original position.
6. If the engine fails to start in 10 seconds, wait 30 seconds and
try again. If the engine begins to stall, reprime (push key in)
until the engine is running.
IMPORTANT: RAPID ACCELERATION HAZARD: Before shifting
your outboard from neutral into gear, decrease engine speed to
slow. This will prevent a rapid acceleration that can cause people
in the boat to be thrown from their seats or out of the boat, causing
injury or death.
STARTING GUIDELINE
Temperature Starting procedure
Over 25 °C
( 77°F)
Turn the throttle grip to the original position. Pull the choke
knob and rewind starter once. Turn the throttle grip to start
position, push the choke knob back, then pull the rewind
starter until the engine starts.
15°C–25°C
(59 °F–77°C)
Turn the throttle grip to start position. Pull the choke knob and
rewind starter once. Push the choke knob back and pull the
rewind starter until the engine starts.–
Below 15 °C
(59 °F)
Turn the throttle grip to start position. Pull the choke knob and
the rewind starter until combustion occurs. Push the choke
knob back and pull the rewind starter until the engine starts.
Warm‑Up
Run the engine at a low speed for about three minutes for warm‑up
operation before cruising, permitting the oil to circulate throughout
the engine, otherwise the life of the engine will be shortened
greatly. During warm‑up operation, confirm that cooling water is
discharged from its water pump indicator hole.