Mercury 25 2-Stroke Скачать руководство пользователя

Страница: 12 / 123

WARRANTY INFORMATION

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN
WARRANTY COVERAGE:

Warranty coverage is available only to

retail customers that purchase from a dealer authorized by

Mercury Marine to distribute the product in the country in which the

sale occurred, and then only after the Mercury Marine specified

pre‑delivery inspection process is completed and documented.

Warranty coverage becomes available upon proper registration of

the product by the authorized dealer. Routine maintenance

outlined in the Operation and Maintenance Manual must be timely

performed in order to maintain warranty coverage. Mercury Marine

reserves the right to make warranty coverage contingent upon

proof of proper maintenance.

WHAT MERCURY WILL DO:

Mercury's sole and exclusive

obligation under this warranty is limited to, at our option, repairing

a defective part, replacing such part or parts with new or Mercury

Marine certified re‑manufactured parts, or refunding the purchase

price of the Mercury product. Mercury reserves the right to improve

or modify products from time to time without assuming an

obligation to modify products previously manufactured.

HOW TO OBTAIN WARRANTY COVERAGE:

The customer

must provide Mercury with a reasonable opportunity to repair, and

reasonable access to the product for warranty service. Warranty

claims shall be made by delivering the product for inspection to a

Mercury dealer authorized to service the product. If purchaser

cannot deliver the product to such a dealer, written notice must be

given to Mercury. We will then arrange for the inspection and any

covered repair. Purchaser in that case shall pay for all related

transportation charges and/or travel time. If the service provided is

not covered by this warranty, purchaser shall pay for all related

labor and material, and any other expenses associated with that

service. Purchaser shall not, unless requested by Mercury, ship

the product or parts of the product directly to Mercury. Proof of

registered ownership must be presented to the dealer at the time

warranty service is requested in order to obtain coverage.

Содержание 25 2-Stroke




























































































































Результаты поиска

Содержание 25 2-Stroke

Отзывы:

Похожие инструкции для 25 2-Stroke

Бренды по названию

Популярные бренды

Mercury 25 2-Stroke, Руководство пользователя

Результаты поиска

Содержание 25 2-Stroke

Отзывы:

Похожие инструкции для 25 2-Stroke

Бренды по названию

Популярные бренды