Mercury 225 OptiMax Скачать руководство пользователя | Manualshive

Страница: 19 / 144

background image

Expenses related to haul‑out, launch, towing, storage, telephone, rental,

inconvenience, slip fees, insurance coverage, loan payments, loss of time, loss

of income, or any other type of incidental or consequential damages are not

covered by this warranty. Also, expenses associated with the removal and/or

replacement of boat partitions or material caused by boat design for access to

the product are not covered by this warranty.
Nonwarranty maintenance, replacement, or repair of emission control devices

and systems may be performed by any marine engine repair establishment or

individual. The use of non‑Mercury parts for nonwarranty maintenance or

repairs will not be grounds for disallowing other warranty work. The use of

add‑on (as defined at section 1900 (b)(1) and (b)(10) of Title 13 of the

California Code of Regulations) or modified parts not exempted by the

California Air Resources Board may be grounds for disallowing a warranty

claim, at the discretion of Mercury Marine. Failures of warranted parts caused

by the use of a nonexempted add‑on or modified part will not be covered.

DISCLAIMERS AND LIMITATIONS

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A  PARTICULAR  PURPOSE  ARE  EXPRESSLY  DISCLAIMED.  TO  THE
EXTENT  THAT  THEY  CANNOT  BE  DISCLAIMED,  THE  IMPLIED
WARRANTIES  ARE  LIMITED  IN  DURATION  TO  THE  LIFE  OF  THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES
ARE  EXCLUDED  FROM  COVERAGE  UNDER  THIS  WARRANTY.  SOME
STATES/COUNTRIES  DO  NOT  ALLOW  FOR  THE  DISCLAIMERS,
LIMITATIONS  AND  EXCLUSIONS  IDENTIFIED  ABOVE,  AS  A  RESULT,
THEY  MAY  NOT  APPLY  TO  YOU.  THIS  WARRANTY  GIVES  YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS  WHICH  VARY  FROM  STATE  TO  STATE  AND  COUNTRY  TO
COUNTRY.

If you have any questions regarding your warranty rights and responsibilities,

you should contact Mercury Marine at 1‑920‑929‑5040.

California Air Resources Board Explanation of Your California

Emission Control Warranty Statement

YOUR WARRANTY RIGHTS AND OBLIGATIONS:

The California Air

Resources Board is pleased to explain the emission control system warranty on

your 2014–2015 model year outboard engine. In California, new outboard

engines must be designed, built, and equipped to meet the State's stringent

anti‑smog standards. Mercury Marine must warrant the emission control

system on your outboard engine for the periods of time listed below, provided

there has been no abuse, neglect, or improper maintenance of your outboard

engine.
Your emission control system may include parts such as the carburetor or fuel

injection system, the ignition system, and catalytic converter. Also included may

be hoses, belts, connectors, and other emission‑related assemblies.

WARRANTY INFORMATION

eng

9

«
...
17
18
19
20
21
...
»

Содержание 225 OptiMax

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 225 OptiMax

2009 AQUATRAX F-15

Бренд: Honda Страницы: 296

Бренд: O'Brien Страницы: 2

WAVEBREAK KAYAK 1426289

Бренд: Bestway Страницы: 12

2009 Wave Runner

Бренд: Yamaha Страницы: 90

2008 WaveRunner VX

Бренд: Yamaha Страницы: 102

2008 WaveRunner FX Cruiser High Output

Бренд: Yamaha Страницы: 116

2006 SuperJet 700

Бренд: Yamaha Страницы: 111

2003 SuperJet 700

Бренд: Yamaha Страницы: 109

2008 WaveRunner FX SHO: 2008 WaveRunner FX Cruiser SHO

Бренд: Yamaha Страницы: 122

2002 SuperJet 700

Бренд: Yamaha Страницы: 112

2002 WaveRunner

Бренд: Yamaha Страницы: 118

2005 WaveRunner VX11 0Sport

Бренд: Yamaha Страницы: 133

2004 XLT800 WaveRunner

Бренд: Yamaha Страницы: 136

2004 WaveRunner FX Cruiser

Бренд: Yamaha Страницы: 136

2005 WaveRunner FX Cruiser High Output

Бренд: Yamaha Страницы: 139

2006 WaveRunner FX Cruiser High Output

Бренд: Yamaha Страницы: 151

Бренд: Yamaha Страницы: 158

Бренд: Yamaha Страницы: 170

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды