Mercury 2005 Monterey Скачать руководство пользователя страница 111

Страница: 111 / 305

Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.

Lift handle to move seat forward or
backward.

Pull lever up to adjust seatback.

Adjusting the front power seat (if equipped)

Never adjust the driver’s seat or seatback when the vehicle is
moving.

Do not pile cargo higher than the seatbacks to avoid injuring
people in a collision or sudden stop.

Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.

Reclining the seatback can reduce the effectiveness of the seat’s
safety belt in the event of a collision.

The control is located on the outboard side of the seat cushion.

2005 Monterey

(mty)

Owners Guide (post-2002-fmt)
USA_English

(fus)

Seating and Safety Restraints

110

Содержание 2005 Monterey


















































































































































































































































































































Результаты поиска

Содержание 2005 Monterey

Отзывы:

Похожие инструкции для 2005 Monterey

Бренды по названию

Популярные бренды

Mercury 2005 Monterey, Руководство пользователя

Результаты поиска

Содержание 2005 Monterey

Отзывы:

Похожие инструкции для 2005 Monterey

Бренды по названию

Популярные бренды