Mercury 200 VERADO Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 145

background image

FEATURES AND CONTROLS

77

Turning off the starboard outer engine while underway will cause
the starboard inner engine to go into forced neutral/idle. Operation
to the inner engine can be restored by turning the starboard outer
engine ignition key to the on position and moving the starboard
control handle back into neutral position and then re-engaging. The
inner engine speed and gear shift will then be controlled by the
starboard control handle.
Turning off the port outer engine while underway will cause the port
inner engine to go into forced neutral/idle. Operation to the inner
engine can be restored by turning the port outer engine ignition key
to the on position and moving the port control handle back into
neutral position and then re-engaging. The inner engine speed and
gear shift will then be controlled by the port control handle.
Turning off one of the inner engines while underway will have no
effect on the operation of the outer engines.
If  a  failure  should  occur  while  underway  which  causes  the
starboard outer engines into forced neutral/idle condition, the inner
starboard engine will also be forced to neutral/idle. Operation to
the inner engine can be restored by moving the starboard control
handle back into neutral and then re-engaging.
If  a  failure  should  occur  while  underway  which  causes  the  port
outer  engines  into  forced  neutral/idle  condition,  the  inner  port
engine will also be forced to neutral/idle. Operation to the inner
engine can be restored by moving the port control handle back into
neutral and then re-engaging.

«
...
83
84
85
86
87
...
»

Содержание 200 VERADO


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 200 VERADO

Бренд: Garz Fricke Страницы: 35

Бренд: Ublox Страницы: 23

Бренд: Giada Страницы: 2

Бренд: AOpen Страницы: 8

Бренд: Texas Instruments Страницы: 19

Бренд: PC Partner Страницы: 20

Бренд: AOpen Страницы: 8

Бренд: ST Страницы: 15

Бренд: Raptor Страницы: 59

Бренд: MSI Страницы: 104

Бренд: Gigabyte Страницы: 96

Бренд: Microchip Technology Страницы: 2

Бренд: Vox Technologies Страницы: 36

Бренд: Gigabyte Страницы: 96

GA-8IP775 Series

Бренд: Gigabyte Страницы: 80

MOTORKIT-91F267-MC

Бренд: Fujitsu Страницы: 33

Бренд: Fujitsu Страницы: 30

Бренд: Fujitsu Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды