200/225/250/275 VERADO 4-STROKE
90-10238051
Page 11 / 51
•
To reduce noise on aluminum or metal hulls, isolate steering hoses from hull with
suitable non-abrasive hangers.
•
Steering hoses from steering wheel helm must be free of twists or stress. Gently
secure hose bundle together with a cable tie, located approximately 25.4 cm
(10 in.) from the steering wheel helm.
•
Do not mount pump on an angle greater then 15° from vertical position.
•
The pump electrical wiring must be within reach of the auxiliary battery.
•
Pump should be mounted in an area that allows sound enclosure, cover removal,
and easy access to the fill cap.
•
Install pump in an area where bilge water will not contaminate the pump.
•
To reduce transmitted noise, mount pump on wood or fiberglass surface. Avoid
mounting pump on aluminum or steel surfaces.
REQUIRED MOUNTING CLEARANCES FOR THE POWER STEERING PUMP
a
c
ob01458
b
d
a -
215 mm (8 1/2 in.)
b -
310 mm (12 7/32 in.) to top cover (not shown)
c -
285 mm (11 1/4 in.)
d -
432 mm (17 in.) clearance required for cover removal
INSTALLING POWER STEERING PUMP
1. The power steering pump can be mounted two ways:
•
On a side of the internal bulkhead
•
Mounted on the floor
