Mercury 135 Verado страница 108 Скачать руководство пользователя

Страница: 108 / 146

MAINTENANCE

100

CLEANING AND WAXING PROCEDURE

1. Before washing, rinse the cowls with clean water to remove

dirt and dust that may scratch the surface.

2. Wash the cowls with clean water and a mild non‑abrasive

soap. Use a soft clean cloth when washing.

3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a non‑abrasive automotive polish

(polish designed for clear coat finishes). Remove the applied

wax by hand using a clean soft cloth.

5. To remove minor scratches, use Mercury Marine Cowl

Finishing Compound (92‑859026K 1).

Cleaning Care for the Powerhead (Saltwater Use)

If the outboard is operated in saltwater, remove the top cowl and

flywheel cover. Inspect the powerhead and powerhead

components for salt build‑up. Wash off any salt build‑up from the

powerhead and powerhead components with fresh water. Keep

water spray out of the air filter/intake and alternator. After washing,

allow the powerhead and components to dry. Apply Quicksilver or

Mercury Precision Lubricants Corrosion Guard spray on the

external metal surfaces of the powerhead and powerhead

components. Do not allow the Corrosion Guard spray to come in

contact with the alternator drive belt or belt pulleys.
IMPORTANT: Do not allow lubricant or Corrosion Guard spray to

come in contact with the alternator drive belt or the belt pulleys.

The alternator drive belt could slip and be damaged if it becomes

coated with any lubricant or Corrosion Guard spray.

Tube Ref No.

Description

Where Used

Part No.

120

Corrosion Guard

External metal

surfaces of the

powerhead and

powerhead

components.

92-802878-55

Battery Inspection

The battery should be inspected at periodic intervals to ensure

proper engine starting capability.

Содержание 135 Verado



















































































































































Результаты поиска

Содержание 135 Verado

Отзывы:

Похожие инструкции для 135 Verado

Бренды по названию

Популярные бренды

Mercury 135 Verado, Руководство пользователя

Результаты поиска

Содержание 135 Verado

Отзывы:

Похожие инструкции для 135 Verado

Бренды по названию

Популярные бренды