1.0 Safe Operating Conditions
READ THIS MANUAL BEFORE USING BURNISHER. KNOW THE PROPER
OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS
EQUIPMENT
BEFORE
USE.
Reduce the Risk of Fire, Electric Shock or Injury:
• This burnisher is designed for indoor use only. Do not
use outdoors. Do not expose to rain.
• Do not wash the motor with flowing water. If the motor
gets wet, seek authorized service.
• Keep the vents on this air-cooled motor free from debris.
Do not operate with the motor covered or with vents
blocked. Do not use this machine as a floor sander.
• Never operate this machine near flammable dusts, liquids
or vapors. Never use flammable solvents as a cleaning
agent. Engine sparks and operating heat can cause fire.
• Never handle electrical equipment with wet hands. Never
operate this machine with bare feet.
• Unplug the machine when not in use and when servicing
the equipment. To unplug, grasp the plug not the cord.
• Do not operate a burnisher with damaged handle
controls, cord or plug. If the equipment is not performing
properly, seek repair from a qualified service supplier.
• This machine is constructed with electrical grounding
at the plug. Operate only when connected to a properly
grounded outlet. See section 1.2 for grounding details.
• Prevent electrical cord abuse. Do not close a door
upon the cord, drive equipment over it, or run the floor
machine over it. Do not expose the cord to hot surfaces.
Do not lift, pull or carry this burnisher by the cord.
• Never operate the machine over sharp objects that can be
thrown out and harm the operator and damage the floor.
Sweep hard floors before scrubbing or buffing. Vacuum
clean carpets before shampooing or bonnet cleaning.
• Train your staff in proper use of this machine.
(2) Ultra High-Speed Burnisher
Ultra High-Speed Burnisher
(11)
8.0 Machine Parts List
Drawing No.
Description
Part No.
Qty.
46
Drip Cap Mount Screw
B-151
6
47
66 Fr. Drip Cap Cover
M-242
2
48
66 Fr. Drip Cap Cover Bumper - Yellow
M-239-Y
2
49
UHS Motor Screen
SCR-01
1
50
UHS Motor Screen Bumper - Yellow
M-238-Y
1
51
Cork Drip Cap Gasket
M-248
2
52
UHS 1.5 HP Motor Only
MOTOR-DC-IMP 1
53
Washer
B-28
2
54
Motor Mount Bolt for UHS Motor
B-143
2
55
Bearing Block Assembly Mount Bolt
B-144
4
56
Bearing Block Assembly
BBA-1
1
57
Bearing Block Gasket
B-145
1
58A
Base Casting 19”
A-131
1
58B
Base Casting 20”
A-132
1
58C
Base Casting 21”
A-132
1
59
Motor Mount Lock Nut
B-150
4
60
Bumper - Yellow
BUMPER STOCK 1
61
Ground Wire Screw
B-68
1
62A
Floppy Disk Driver 19”
DC-18
1
62B
Floppy Disk Driver 20”
DC-20
1
62C
Floppy Disk Driver 21”
DC-20
1
63
Big Mouth Blue Retainer
PR7-ABL
1
64
Screw
B-95
4
65
Bolt
B-149
1
66
Pulley Driver
PD-1
1
67
Bumper Screw
B-68
1
68
Bumper Strap
BUMPER STRAP 1
69A
Drive Belt DC-1500 and 1170
DB-2
1
69B
Drive Belt DC-2000
DB-1
1
70
Allen Head Set Screw For PD
B-149
2
71A
Pulley To Fit Motor 1500 RPM DC
PM-3
1
71B
Pulley To Fit Motor 1170 RPM DC
PM-2
1
71C
Pulley To Fit Motor 2000 RPM DC
PM-1
1
72
Cotter Pin Wheel Axel
B-142
2
73
Spring Washer
B-51
4
74
Wheel Axel
B-16
2
75
6” Operating Wheel
M-250
2
76
Transport Wheel Axel Bolt
B-26
2
77
4” Transport Wheel
M-209
2
78
Lock Nut
B-77
2
79
Front Wheel Assembly
FCA-1
1
