MerCruiser Sterndrive TDI 3.0L, Руководство пользователя

Страница: 41 / 119

Section 3 - On The Water
90-8M0070851
eng
AUGUST 2012 Page 33
Operation Chart—Models with Electronic Control System (ECS)
Starting Procedure After Starting While Underway Stopping and Shutdown
Open the engine hatch. Air
out the bilge completely.
Observe all gauges and
indicator lamps to check the
condition of the engine. If not
normal, stop the engine.
Frequently observe all
gauges and indicator lamps
to monitor engine condition.
Shift the remote control lever
to the neutral position.
Turn the battery switch on, if
equipped.
Check for fuel, oil, water, fluid,
and exhaust leaks, etc.
Run the engine at idle‑RPM
for several minutes to allow
the turbocharger and engine
to cool.
Turn on and run the engine
compartment bilge blower, if
equipped, for five minutes.
Check shift and throttle control
operation.
Turn the key switch to "OFF"
position.
Check for leaks: fuel, oil,
water, fluid, etc.
Check steering operation.
Turn the battery switch off, if
equipped.
Open the fuel shut‑off valve,
if equipped.
Close the fuel shut‑off valve,
if equipped.
Open the seacock, if
equipped.
Close the seacock, if
equipped.
Prime the fuel injection
system, if necessary.
Flush the seawater cooling
circuit, if operating in
saltwater, brackish water, or
polluted water.
Turn the key switch to
"RUN" position and check
that the lights and indicator
lamps come on.
Turn the key switch to
"START" position after the
indicator lamp for the glow
plugs (if equipped) ceases.
Release the key when the
engine starts.
Check that the charge
indicator and oil pressure
indicator lamps cease after
engine starts.
Warm‑up the engine at a
fast idle‑RPM for several
minutes.
Starting, Shifting, and Stopping
!
WARNING
Vapors can ignite and cause an explosion, resulting in engine damage or severe personal injury. Do not use volatile starting
aids such as ether, propane, or gasoline in the engine air intake system.
!
WARNING
Fuel vapors trapped in the engine compartment may be an irritant, cause difficulty breathing, or may ignite resulting in a fire
or explosion. Always ventilate the engine compartment before servicing the power package.