MerCruiser Black Scorpion Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 106

background image

Section 3 - On The Water

Page 34

90-865253070 JUNE 2007

6. Inspect the power package for fuel, oil, water and exhaust leaks.
7. Move control handle with a firm, quick motion forward to shift to forward gear, or

backward to shift to reverse. After shifting, advance throttle to desired setting.

NOTICE

Shifting into gear at engine speeds above idle will damage the gearcase. Shifting into

gear when the engine is not running can cause misalign the clutch, preventing proper

shifting. Always shift the gearcase into gear when the engine is operating at idle. If you

must shift while the engine is not operating, rotate the propeller shaft in the appropriate

direction during shifting.

STOPPING THE ENGINE

1. Move the remote control handle to neutral/idle and allow the engine to slow to idle

speed. If engine has been operated at high speed for a long period of time, allow the

engine to cool at idle speed for 3 to 5 minutes.

2. Turn ignition key to the "OFF" position.

Throttle Only Operation

1. Refer to

Remote Controls

section for remote control features.

2. Move the control lever to the idle/neutral position.
3. Depress and hold the throttle only button, and move the control lever to the idle/forward

or idle/reverse position.

4. Advancing the control lever beyond the idle/forward or idle/reverse position will cause

engine speed to increase.

IMPORTANT: Moving the control lever back to the idle/neutral position will disengage the

throttle only button and allow the engine to shift into gear.
5. Throttle only mode is deactivated by moving the control lever to the idle/neutral position.

Moving the control lever from the idle/neutral position to the idle/forward or idle/reverse

position without pressing the throttle only button will shift the unit into the chosen gear.

Freezing Temperature Operation

IMPORTANT: If the boat is operated during periods of freezing temperature, precautions

must be taken to prevent freeze damage to the power package. Damage caused by

freezing is not covered by Mercury MerCruiser Limited Warranty.

Drain Plug and Bilge Pump

The engine compartment in your boat is a natural place for water to collect. For this reason,

boats are normally equipped with a drain plug and/or a bilge pump. It is very important to

check these items on a regular basis to ensure that the water level does not come into

contact with your power package. Components on your engine will be damaged if

submerged. Damage caused by submersion is not covered by the Mercury MerCruiser

Limited Warranty.

«
...
40
41
42
43
44
...
»

Содержание Black Scorpion











































































































Отзывы:

Нет отзывов

Похожие инструкции для Black Scorpion

Бренд: Mitsubishi Страницы: 176

Бренд: RHINO MOTION CONTROLS Страницы: 4

MICROPUMP EagleDrive MS

Бренд: Idex Страницы: 23

Бренд: RCGF Страницы: 22

ALCYO ACCU-TRK-AT

Бренд: Oben Страницы: 28

Бренд: WPT POWER Страницы: 39

Бренд: Paccar Страницы: 121

Бренд: Kohler Страницы: 4

Бренд: WEICHAI Страницы: 33

Бренд: WEG Страницы: 68

Throttling Governor Kerosene Stationary Engines

Бренд: Worthington Страницы: 33

Бренд: SPE Страницы: 7

Бренд: TEM Страницы: 19

75-200 V DC Series

Бренд: TEM Страницы: 38

Бренд: TEM Страницы: 42

Бренд: Agrimate Страницы: 32

Бренд: Universal Страницы: 26

Бренд: Ford Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды