MerCruiser Black Scorpion Скачать руководство пользователя страница 13

Страница: 13 / 106

Section 1 - Warranty

90-865253070 JUNE 2007

Page 5

Termination of Coverage

Warranty coverage is terminated for used product obtained in any of the following ways:

•

Repossession from a retail customer

•

Purchase at auction

•

Purchase from a salvage yard

•

Purchase from an insurance company that obtained the product as a result of an insurance claim

Conditions That Must Be Met in Order to Obtain Warranty Coverage

Warranty coverage is available only to retail customers that purchase from a dealer authorized by Mercury Marine to distribute the

product in the country in which the sale occurred, and then only after the pre‑delivery inspection process specified by Mercury Marine

is completed and documented. Warranty coverage becomes available upon proper registration of the product by the authorized

dealer. Inaccurate warranty registration information regarding recreational use or subsequent change of use from recreational to

commercial (unless properly reregistered) may void the warranty at the sole discretion of Mercury Marine. Routine maintenance

must be performed according to the maintenance schedule in the Operation, Maintenance & Warranty manual in order to obtain

warranty coverage. Mercury Marine reserves the right to make any warranty coverage contingent upon proof of proper maintenance.

What Mercury Marine Will Do

Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our option, repairing a defective part, replacing

such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the Mercury Marine

product. Mercury Marine reserves the right to improve or modify products from time to time without assuming an obligation to modify

products previously manufactured.

How to Obtain Warranty Coverage

The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for warranty

service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized to service the

product. If the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury Marine. Mercury Marine

will then arrange for the inspection and any covered repair. The purchaser in that case shall pay for all related transportation charges

and travel time. If the service provided is not covered by this warranty, the purchaser shall pay for all related labor and material and

any other expenses associated with that service. The purchaser shall not, unless requested by Mercury Marine, ship the product or

parts of the product directly to Mercury Marine. Proof of registered ownership must be presented to the dealer at the time warranty

service is requested in order to obtain coverage.

Содержание Black Scorpion











































































































Результаты поиска

Содержание Black Scorpion

Отзывы:

Похожие инструкции для Black Scorpion

Бренды по названию

Популярные бренды

MerCruiser Black Scorpion, Руководство пользователя

Результаты поиска

Содержание Black Scorpion

Отзывы:

Похожие инструкции для Black Scorpion

Бренды по названию

Популярные бренды