MerCruiser 3.0 TKS, Руководство пользователя

Страница: 95 / 112

Section 6 - Storage
90-8M0053372
eng
NOVEMBER 2010 Page 87
6. Pump air into the system until both green indicators extend and water drains from both sides of the engine. The port side
will begin draining before the starboard side.
Closed Cooled Models Seawater Cooled Models
a - Blue drain plug location
b - Blue air pump
c - Air manifold
d - Green indicators
Scorpion Models
a - Blue air pump
b - Air manifold
c - Green indicators
d - Blue drain plug locations
7. Verify that water is draining from each opening. If not, use the
Three Point Manual Drain System
instructions.
a - Port side drain location
b - Starboard side drain location
8. Allow the system to drain for a minimum of five minutes. Pump air as necessary to keep the green indicators extended.
9. Crank the engine over slightly with starter motor to purge any water trapped in the seawater pump. Do not allow engine to
start.
10. Remove the air pump from the air manifold and return it to the mounting bracket.
11. Mercury MerCruiser recommends leaving the drain system open while transporting the boat or while performing other
maintenance. This helps ensure that all water is drained.
6124
a
b
c
d
6125
a
b
c
d
21125
a
b
c
d
d
a
b
6133