MAINTENANCE
Form No. TS2M-0210
11
General
Merco Thermal Shelves are designed for maximum durability
and performance with minimum maintenance.
ELECTRIC SHOCK HAZARD:
• Turn power switch OFF, unplug power cord, and allow
unit to cool before performing any maintenance or
cleaning.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Do not steam clean or use excessive water on unit.
• Use only OEM Replacement Parts when service is
required. Failure to use OEM Replacement Parts will
void all warranties and may subject operators of the
equipment to hazardous electrical voltage, resulting in
electrical shock or burn. OEM Replacement Parts are
specified to operate safely in the environments in
which they are used. Some aftermarket or generic
replacement parts do not have the characteristics that
will allow them to operate safely in Merco equipment.
This unit has no “user-serviceable” parts. If service is
required on this unit, contact a Factory Authorized Service
Agent or contact the Merco Service Department at
800-506-9565.
WARNING
Cleaning
To preserve the finish of the Merco Thermal Shelf, it is
recommended that all surfaces be cleaned daily
Use non-abrasive cleaners only. Abrasive cleaners could
scratch the finish of the unit, marring its appearance and
making it susceptible to soil accumulation.
1. Turn off the unit, unplug the power cord, and allow the unit
to cool.
2. Remove and wash all food pans, if necessary.
3. Wipe down all metal surfaces with a clean, damp cloth.
Stubborn stains may be removed with a good stainless steel
or non-abrasive cleaner. Clean hard to reach areas using a
small brush and mild soap.
NOTICE