II.
INSTALLATION
Install the PD-4 in the most convenient location for ease of cleaning, maintenance, and general
operation. Avoid installing in locations with drafts, close proximity to grease or vapor-producing
appliances, or other high ambient heat equipment. Recommended height from floor to bottom of
toaster is 43”. Shelf or counter top should be able to support the toaster weight of 24 lbs.
Overhead clearance from top of toaster should allow for easy loading and heat dissipation. 10”
minimum clearance is recommended
.
WARNING
This toaster must be plugged into the proper voltage which is specified on the data plate located on the back
panel of the toaster. Use of any other voltage or altering of plug will damage unit, void the warranty, and may
cause injury.
ELECTRICAL SPECIFICATIONS
Voltage
(Volts AC)
Amperage
(Amps)
Max.
Power
(KW)
Frequency
(HZ)
Phase
Cord
(Attached)
Plug
(Attached)
120
16
1.9
50/60
1
3’
NEMA 5-20P
208
13
2.6
50/60
1
3’
NEMA 6-15P
240
11
2.6
50/60
1
3’
NEMA 6-15P
*220
10
2.2
50
1
3’
NONE
*240
11
2.6
50
1
3’
NONE
The circuit on which the receptacle is installed must be of adequate wiring size and sufficient
capacity to meet the requirements indicated on the unit data plate and in accordance with the
National Electrical Code and local electrical installation codes.
•
The 220V electrical information in the shaded area pertains to European models. The
240V electrical information in the shaded area pertains to United Kingdom models.
208 Volt and 240 Volt Models:
The PD-4 is equipped for electrical installation using a receptacle located in the back of the
toaster. A specially designed detachable cordset fits the receptacle and comes with the proper
plug for the voltage requirements of the toaster. If you prefer, the PD-4 may be connected
directly to your electrical service by an authorized service agency or qualified electrician.
CONTROL PANEL FEATURES
The PD-4 control panel is divided into two modules, each operating its corresponding toast slots
to the left and right.
Light-Dark Toast Control-
Numerically graduated from 1 to 10, this control is used to set the
degree of toast color desired.
Toasting Indicator Light-
When toasting cycle is in process, this light will illuminate.
Push-To-Toast Button-
Depress this button to start the toasting cycle.
Reset Button-
Depress this button to interrupt a toasting cycle.