MHC-22 Holding Cabinet Items 86002 & 86003 Service, Installation And Operation Manual
13
For customer service, call (989) 773-7981, (800) 733-8829, Fax (989) 773-3210, www.mercoproducts.com
Disconnect power supply before servicing or
cleaning this unit. Safeguard power so it cannot be
accidentally restored. Failure to do so could result in
serious injury.
Unit must be cool to touch and disconnected from
power source prior to cleaning. Do not use power-
cleaning equipment, steel wool, or wire brushes on
stainless steel or painted surfaces.
This appliances plug is the disconnect device and,
as such, the unit must be installed so that the plug
is accessible.
Merco Holding Cabinets are designed for easy cleaning and
minimum maintenance. The stainless steel outer case requires
nothing more than a daily wiping with a damp cloth. If, however,
an excessive amount of food particles/grease are allowed
to collect, a non-abrasive cleaner (hot sudsy water) may be
used. The Product Holding Bin and Bin Lid may be cleaned via
dishwasher or with warm soapy water. Care must be taken to
prevent water or cleaning compounds from getting on internal
parts, especially the switches on the control panel.
Bin Lid Removal Instructions
Note: The illustration below features a Merco MHC-1 (1-Bin
Unit). These instructions also apply to the MHC-22 (2x2 Bin
Unit).
1. Remove bin.
2. Gently pull retention rod.
3. Lower front of bin lid.
4. Remove bin lid.
5. Instal in reverse order.
Rear Retaining Rod
Note: When installing the bin lid, be sure back end of lid
rests on the rear retaining rod, otherwise the lid will not
rest properly on the bin.
CAUTION
CAUTION
DANGER
Maintenance
