P 6
6
5
9
9
10
Please retain product label and instructions for future reference
Step 5
(See Pre-Assembly)
Parts needed - No. 5 QTY 7
No. 6 QTY 12
No. 8 QTY 6
No. 9 QTY 12
No. 10 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 5, 6, 8,
9 & 10) onto the assembly to
create your second level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 7.
***Please Note:
The short boards placed
to create the opening’s for the doors &
windows can be placed either side
depending on your needs.
6
8
IMPORTANT: Pre-drill before fixing screws.
Step 6
Once you have laid the second
level of boards onto the assembly
slide the window(
s
) (No. 1) between the
smaller boards and rest on to the
longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.