P11
Please retain product label and instructions for future reference
Step 13
Once you have laid the second level
of boards onto the log cabin slide the
windows between the smaller
boards and rest on to the longer
board
(if you have not yet
assembled the window frames refer
to step 11)
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may differ
from your choice in product
(
regarding window position
).
Nevertheless the process of fitting the
window is the same
Step 14
Parts needed - No. 23 QTY 6
No. 24 QTY 5
No. 29 QTY 12
No. 30 QTY 6
No. 31 QTY 6
No. 41 QTY 12
Lay the next 6 boards
(
No’s. 23, 24, 29, 30, 31 & 41
) onto
the log cabin, following the
method as shown in the
illustration, bringing the board
level to the top of the window and
door frames.
Please note when you get to the
top of the boards the right hand
boards will be slightly lower.
**Ensure that the boards are
level and flush with each other as
you lay each one.
41
29
29
41
23
24
30
31
Rubber Mallet
may be required
to fit parts.
Step 15
Parts needed - No. 26 QTY 1
Make the log cabin level by
adding another right hand
board
(No. 26)
as shown in the
diagram.
26
Rubber Mallet
may be required
to fit parts.
Step 16
Parts needed - No. 28 QTY 1
No. 35 QTY 1
No. 37 QTY 1
No. 41 QTY 2
Lay the next layer of boards
(
No.28, 35, 37 & 41
) onto the log
cabin, following the method as
shown in the illustration, bring-
ing the board level above the
window and doors.
*Ensure that the boards are
level and flush with each other
as you lay each one.
41
37
28
35
Rubber Mallet
may be required
to fit parts.
41