P 14
Please retain product label and instructions for future reference
a
b
c
Step 30
Parts Needed - No. 20 QTY 1
No. 26 QTY 2
Attach the Door Strip
(No. 20)
to the
back of the secondary door using
4x40mm screws as shown.
Once fixed, place the Tower
Bolts
(No. 26)
roughly into
position and with a pencil
mark the around the bolt.
After marking the bolt onto
the frame, drill a hole for the
barrel bolt to locate into.
Following the hole being
drilled, place the tower bolts
into position and secure using
the screws provided.
12x40mm Screws
Pre drill
hole
40mm
screw
IMPORTANT :
Pre-drill before fixing screws.
c
26
b
a
20
Pre drill
hole
Step 29
Parts Needed - No. 23 QTY 1
No. 24 QTY 1
No. 25 QTY 1
Fit the Mortice lock (
No. 24
into the
recess in the master door (
No. 15
) and
secure using the screws provided. Attach
the Key plate (
No. 25
) to the secondary door
(
No. 14
) with 4x30mm screws.
Fit the door handles (
No. 23
) and
connect with the metalbar to the mortice
lock using 8x30mm screws. Ensure the lock
mechanism closes correctly. If not, remove
the lock and turn the catch around by
pulling the spring loaded latch and turning
it 180 degrees.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
). Neverthe-
less the process of fixing the frames is the
same.
Once components have been fitted, try closing
doors to ensure the doors can be closed and
the lock works.
If your doors do need adjusting please look at
step 11.
12x30mm Screws
a
b
30mm
screw
The Mortice Lock is Reversible
a
b
25
24
14
15
23
