P 10
Please retain product label and instructions for future reference
2
4
IMPORTANT :
Pre-drill before fixing screws.
Step 11
Parts Needed - No. 2 QTY 2
No. 3 QTY 2
No. 4 QTY 2
No. 5 QTY 2
Arrange the left, right, top & bottom window
frames (
No’s. 2, 3, 4,& 5
) onto a firm and level
surface. Secure the top and bottom frames to
the uprights using 1x80mm screw per corner,
ensuring the screws do
NOT
protrude through
the front of the window framing.
Use this method to construct 2 windows.
16x80mm Screws
Pre drill
hole
80mm
screw
5
3
5
3
The internal lip of the window
frame should be postioned on
the inside of the building.
Pre drill
hole
30mm
screw
Step 12
Parts Needed - No. 1 QTY 2
No. 7 QTY 4
Position the window
(No. 1)
so that it
sits centrally within the window
frame. Fix the female part of the flag
hinge
(No. 7)
to the window using
4x30mm screws, attach the male part
of the flag hinge
(No. 7)
to the
window frame using 4x30mm screws
ensuring that the window can open
and close freely.
*Ensure to attach the hinge to the
horizontal frame of the window*
Repeat this method for both windows
**It is important to fit the windows
within the frame at this stage so
that you can establish the position
of the hinges. The hinges come in
two parts. Remove the window
from the frame after fitting.
32x30mm Screws
IMPORTANT :
Pre-drill before fixing screws.
1
7
7
7
