Pre drill
hole
70mm
screw
26
26
26
a
Step 16
Parts needed - No. 26 QTY 3
s
No. 26
ensure to
pre-drill to avoid the boards splitting
*Please note:
The gable shown is for
illustrative purposes and may differ in
width from your choice in product.
Nevertheless, despite any differences the
process of xing the
is the
same.
12x70mm Screws
a
b
IMPORTANT:
Pre-drill before xing screws.
26
b
Rubber Mallet
may be required
to t parts.
40mm
screw
Pre drill
hole
Cut to t
Step 17
Parts needed - No. 32 QTY 56
No. 32
No. 38
*Ensure the roof boards meet at the top
of the apex and leave an overhang at
the bottom.
*Please Note:
This image is for illustrative
purposes and may differ from your choice
in product. Nevertheless the process of
cutting and tting the last roof board(s) is
the same.
168 x 40mm Screws
a
b
23b
32
32
a
32
b
IMPORTANT:
Pre-drill before xing screws.
