P 5
Please retain product label and instructions for future reference
Step 3
Parts Needed - No. 5 QTY 6
No. 6 QTY 6
No. 8 QTY 6
No. 9 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the first 6 boards (No’s. 5, 6
8 & 9) onto the starter boards
to create your first level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 5
Parts Needed - No. 6 QTY 12
No. 7 QTY 6
No. 8 QTY 6
No. 9 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 6, 7,
8 & 9) onto the assembly to
create your second level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 7.
9
9
5
6
8
9
6
6
7
9
8
Step 4
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame (No.
2) over the boards resting the frame
on top of the starter board.
*Please note:
This image is for illustra-
tive purposes and may differ from
your choice in product (
regarding
door position
). Nevertheless the
process of fitting the door frame is
the same.
**Please Note:
The short boards at
the
front of the building (either side of
the door and window opening’s) can
be placed either side depending on
your needs.
