Mercia Garden Products 03DTSHPN0409SHPB-V1, Общее руководство по инструкции

Страница: 4 / 11

P 4
Please retain product label and instructions for future reference
Step 4
Place the two asembled Floors
(No.4)
up against the 9x9 Corner Summer-
house on a flat, level surface. Fix into
position using 4x60mm screws as
shown.
**To position the side shed on the
left, position the floor on the left and
fix in the same way shown.
4x60mm Screws
Pre drill
hole
60mm
screw
Step 5
Right Side Shed only
Parts Needed- No.23 QTY 1 (9x9
Corner Summer house)
Parts Needed - No.1 QTY 1
Cut down the underhand framing
(X)
by 70mm on both ends. It may be
necessary to re-attach the framing
and attach the rest of the side shed
following the same steps.
Fix the side of the Door Panel
(No.1)
against the side of the 9x9
Corner Summerhouse Window
Panel as shown using
4x60mm screws.
Do not secure the building
to the Floor until the roof is fitted.
4x60mm Screws
Pre drill
hole
60mm
screw
1
X
**To position the side shed on the
LEFT, you do not need to alter the
under hang framing.
Pre drill
hole
60mm
screw
Step 6
Parts Needed- No.2 QTY 1
Fix the side of the Back Panel (
No. 2
)
against the side of the 9x9 Corner
Summerhouse Back Panel as shown
using 4x60mm screws.
Do not secure the building to the
Floor until the roof is fitted.
4x60mm Screws
2
Pre drill
hole
30mm
screw
Step 3
Parts Needed - No. 4 QTY 1
Secure the floor
(No. 4)
to the assembly
from Step 2, using 6x30mm screws per
floor.
6x30mm Screws
4