Mercia Garden Products 02DTTWR6565-V1-PEFC, Инструкция по эксплуатации

Страница: 6 / 13

9
Step 5
Part needed - &
With some help, tip the platform
(No.1)
on it’s side. Place the front
post
(No.9)
within the cut out on the
platfrom, make sure the pencil mark
lines up with the top of the platfrom
framing.
Once you are happy the front post is
lined up correctly fit a 150mm screw
through the post into the platform,
do this from the two available sides
ensuring the screws are staggered
and do not clash.
2 x 150mm screws
150mm
screw
1 9
1! 2!
Pre drill
hole
8 7 1
Step 6
Part needed
- & &
Use the measurment taken
previously for the corner braces
(No.7)
and using a pencil mark out
where the corner braces need to sit
on the platform (No.1) and the front
post
(No.9)
Fix the two corner braces in place
using 100mm screws.
4 x 100mm screws
100mm
screw
7
7
1! 2!
Pre drill
hole
9
Step 7
Parts needed - &
With some help tip the platform
(No.1) round to the other side.
Place the remaining front post
(No.9) within the cut out on the
platfrom, make sure the pencil
mark lines up with the top of the
platfrom framing.
Once you are happy the front post
is lined up correctly fit a 150mm
screw through the post into the
platform, do this from the two
available sides ensuring the screws
are staggered and do not clash.
2 x 150mm screws
150mm
screw
1
9
1! 2!
Pre drill
hole
1
Step 8
Parts needed
- & &
Use the measurment taken
previously for the corner braces and
using a pencil mark out where the
corner braces
(No.7)
need to sit on
the platform
(No.1)
and the front
post
(No.9)
Fix the two corner braces in place
using 100mm screws.
4 x 100mm screws
100mm
screw
7
7 9
1!
2!
Pre drill
hole
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P6
Please retain product label and instructions for future reference