Step 3
Place the plain gable (
No.3
)
and one of the plain panels
(
No.2
) on to the floor and fix
the corners together using
3x50mm screws.
Do not secure the building to
the floor until the roof is
secured in place.
*Ensure the plain gable is fitted on
the inside of the plain panel. Screw
through the plain gable framing
into the framing of the plain panel.
3x50mm screws
Pre Assembly
Remove transportation blocks from
the bottom of each panel before
beginning assembly. Each Panel
should have two blocks.
Step 2
Place the floor (
No.4
) on a firm and
level base. Ensure the base has
suitable drainage free from areas
where water can collect. See front
page for base requirments.
Step 1
Place the door (
No.6
) into the door
gable (
No.1
) ensuring an even gap
all the way around.
Secure the hinges (
No.14
) to both
the door gable and door using
7x30mm screws per hinge. Ensure
the hinges are spaced evenly apart
from the top and bottom of the
door.
14x30mm screws
Pre drill
hole
50mm
screw
Pre drill
hole
30mm
screw
14
1
6
14
14
3
2
P 3
Please retain product label and instructions for future reference
4
