Mercia Garden Products 01DTSHRAX0806SDFW-V1, Руководство по сборке

Страница: 7 / 11

P 7
Please retain product label and instructions for future reference
Step 12
Parts needed - No. 11 QTY 8
No. 12 QTY 6
No. 13 QTY 2
No. 18 QTY 2
No. 23 QTY 4
Fix 4x Inner Window Strip
(No. 11)
to the sides
of the framing exposed in the window gap of
the Window Panel
(No. 2)
using 3x30mm
screws per Strip .
Place the Plastic Window Cill
(No. 18)
into the
window panel (No. 2) opening as shown in
the illustration. Fix screws through cill for
extra support using 3x30mm screws.
Fit the styrene sheets
(No. 23)
on top of the
Plastic Window Cill (No. 18) .
*For added weather protection fit your
windows using silicone sealant around
the outside edges.
**When positioning the styrene sheets ensure
there is an equal distance on all sides.
Attach 1x Outer Window Strip
(No. 13)
along
the top of the window opening. Followed by
attaching 3x Outer Window Strips
(No. 12)
to
either side of the windows and the centre.
Secure into place using 3x30mm screws per
strip. **You may need to cut these to fit.**
Repeat this process for the other Window Panel
54x30mm Screws
Pre drill
hole
30mm
screw
a
b
c
11
11
11
11
18
a
b
c
d
d
SILICONE
SEALANT
12
12
12
23
23
Side View
Styrene
Window Cill
Cladding
13
*
Cut down
trims to fit
Felt
tacks
25
25
26
Step 13
Parts needed - No. 25 QTY 1
No. 26 QTY 1
Cut the felt
(No. 25)
into two sheets at
2500mm and cut a sheet from the
capping felt (No. 26) at 2500mm. Lay
onto roof as shown in diagram ensuring
there is a 50mm overhang around the
sides.
Apply the felt tacks with a 100mm space
per tack..
100x Tacks
HANDLE
WITH CARE
1
2
3
4
25
25
26