Mercia Garden Products 01DTGRODB0808-V3, Инструкция по эксплуатации

Страница: 5 / 11

P 5
Please retain product label and instructions for future reference
a
a
Pre drill
hole
Pre drill
hole
Step 7
Place the cover strip 13mm above
the gap in the window panel and
fix into place using 3x30mm screws.
*Measure and trim the strip before
fitting.
3x30mm Screws
If you would like the widows
to open attach the window to
the strip using 2x butt hinges.
Fix the hinges to the window
using 3x16mm screws per
hinge and to the strip with
3x30mm screws.
6x16mm Screws
6x30mm Screws
If you would like the window
to be fixed, secure the window
into the gap using 4x30mm
screws. Ensure to screw through
the window into the panel
framing.
4x30mm Screws
b
a
10
Opening Window
Fixed Window
30mm
screw
30mm
screw
16mm
screw
30mm
screw
22
16
Pre drill
hole
a
b
Pre drill
hole
50mm
screw
Step 8
Place floors on a firm and level base, ensure
base has suitable drainage free from areas
where standing water can collect. (
see front
page on base requirements ).
Ensure floors are flush to each other and fix
using 8x50mm screws. Alternate fixing
positions along the length of the floors.
*NOTE: The floors do NOT connect by a
tongue and groove fixing.
8x50mm Screws
1
1
1
8
Pre drill
hole
50mm
screw
Step 9
Place the assembled plain gable
and first plain side onto the floor
and fix in place.
Fix the corners with 50mm
screws.
3x50mm Screws
a