Mercedes-Benz Viano Taxi, Руководство владельца дополнения

Страница: 40 / 63

37
Practical advice
Fitting the taxi roof sign
3
Fitting the taxi roof sign
The threaded holes and the connector
sockets for the taxi roof sign are located
on the driver's side beneath a cover behind
the B pillar.
1
Screws
2
Cover
Undo the two screws
1
.
Remove cover
2
.
3
Threaded hole
4
Taxi roof sign connection cable
Screw the taxi roof sign adapter tightly
onto the roof using both threaded
holes
3
. To prevent a short circuit, fit
connection cable
4
in such a way that
it does not chafe.
Fitting the taxi roof sign
!
When refitting the cover, tighten the
screws to a maximum tightening
torque of 2.5 Nm.
!
Tighten the taxi roof sign adapter
securing screws by at least four turns.
Check regularly that the taxi roof sign
adapter is securely tightened.