Mercedes-Benz Sprinter, Руководство по эксплуатации

Страница: 93 / 354

1
Low beam/perimeter light housing cover
2
High beam/daytime running lamps housing
cover
3
Turn signal light socket
#
Switch off the lighting system.
#
Low beam/perimeter light: remove housing
cover
1
towards the rear.
#
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the base
of the socket.
#
Align and insert the socket.
#
Attach housing cover 1 .
#
High beam/daytime running lamps: remove
housing cover 2 towards the rear.
#
Turn the socket counter-clockwise and pull it
out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the base
of the socket.
#
Insert the socket and turn it clockwise.
#
Attach housing cover
2
.
#
Turn signal light:
#
Turn socket 3 counter-clockwise and remove
it.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Insert socket 3 and turn it clockwise.
▌ Additional turn signal light
Requirements:
R
Additional turn signal light (all-wheel drive vehi-
cles): bulb type P 21 W
#
Switch off the lighting system.
#
Unscrew screws 1 and remove light lens 2 .
#
Gently turn the light source counter-clockwise
and take it out of the socket.
#
Insert the new light source into the socket and
turn it clockwise.
#
Position light lens 2 and tighten screws 1 .
Replacing rear light bulbs (Cargo Van and
Passenger Van)
▌
Overview of rear bulb types (Cargo Van and
Passenger Van)
You can replace the following bulbs.
Vehicles with standard tail lamps
1
Brake light/tail light/perimeter light: P 21 W
Light and vision 91