![Mercedes-Benz SLC 300 2019 Скачать руководство пользователя страница 209](http://html1.mh-extra.com/html/mercedes-benz/slc-300-2019/slc-300-2019_operators-manual_1771868209.webp)
Display messages
Possible causes/consequences and
M
M
Solutions
Â
Replace Key Battery
Replace Key Battery
The SmartKey battery is discharged.
X
Change the battery (
Y
page 69).
Â
Don't Forget Your
Don't Forget Your
Key
Key
The SmartKey is not in the ignition lock. You have opened the driv-
er's door with the engine switched off.
The multifunction display shows the display message a maximum of
60 seconds and is simply a reminder.
X
Take the SmartKey with you when you leave the vehicle.
Â
Key Not Detected
Key Not Detected
(red display message)
The SmartKey is not in the vehicle.
A warning tone also sounds.
If the engine is switched off, you can no longer lock the vehicle cen-
trally or start the engine.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 134).
X
Locate the SmartKey.
X
Press
a
on the steering wheel to confirm the display mes-
sage.
Because there is interference from a strong source of radio waves,
the SmartKey is not detected whilst the engine is running.
A warning tone also sounds.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 134).
X
Insert the SmartKey into the ignition lock and bring into key
mode.
Â
Key Not Detected
Key Not Detected
(white display message)
The SmartKey is currently undetected.
X
Change the location of the SmartKey in the vehicle.
If the SmartKey still cannot be detected:
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
Â
Remove 'Start' But‐
Remove 'Start' But‐
ton and Insert Key
ton and Insert Key
The SmartKey is continually undetected.
KEYLESS-GO is temporarily malfunctioning or is defective. A warn-
ing tone also sounds.
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Display messages
207
On
-b
oar
d
comp
ut
er
an
d
di
sp
lay
s
Z