56
G60.80-3424-00
Introduction of the New Unimog Generation | Model Series 405
Cab exterior
Design
Cab
Cab concept
The open-view cab presents itself in a new, modern design,
while the visual and functional effect of the short engine
hood is emphasized even further. LED lamps with daytime
running lamps are integrated in the new bumpers. To improve
visibility, the windshield wipers are now located above the
windshield. The view of the road surface and implements is
optimal.
In order to minimize the effect of impacts from the road sur-
face, the cab is sprung and dampened. The seat position be-
hind the front axle provides a high level of ride comfort and,
when not driving, a generous amount of space. The entrance
behind the front axle, with a door opening angle of almost
90°, allows the driver to enter and exit the vehicle safely and
conveniently using 3 steps.
Roof-mounted wiper system
A newly developed roof-mounted wiper system wipes snow
to the side. This prevents snow from building up over the en-
gine hood. Since the wiper blades are no longer installed in
the field of view but on the roof, the view towards the front is
improved.
Fields of vision
The open-view cab provides an excellent 360 degree view
with minimal blind spots. The windshield, which extends far
down towards the engine hood, and the low side windows
provide for an excellent view of the working area. The view of
the road surface and implements, for coupling and uncoup-
ling, is optimal. Visibility is further improved by the new front
camera monitor system (optional, code EM3). The large rear
window panels provide a direct view of the working area to
the rear.
– This printout will not be recorded by the update service. Status: 03 / 2013 –
