Mercedes-Benz S-Class, Руководство оператора

Страница: 242 / 586

Evasive Steering Assist has the following charac‐
teristics:
R
Detection of pedestrians, cyclists and vehi‐
cles.
R
Assistance through power-assisted steering if
it detects a swerving maneuver.
R
Activation by an abrupt steering movement
during a swerving maneuver.
R
Assistance during swerving and straightening
of the vehicle.
R
Reaction from a speed of approximately
13 mph (20 km/h) up to a speed of approx‐
imately 68 mph (110 km/h).
The steering support of Evasive Steering Assist
can be canceled at any time by counter steering.
System limits
Full system performance is not available for a
few seconds after switching on the ignition or
after driving off.
If the system is unavailable or the functions are
restricted, the Ä warning lamp appears in the
driver's display.
The system may be impaired or may not func‐
tion, particularly in the following situations:
R
In snow, rain, fog, heavy spray, if there is
glare, in direct sunlight or in greatly varying
ambient light.
R
If the sensors are dirty, fogged up, damaged
or covered. (
/
page 215)
R
If the sensors are impaired due to interfer‐
ence from other radar sources, e.g. strong
radar reflections in parking garages.
R
If a loss of tire pressure or a faulty tire has
been detected and displayed.
R
In complex traffic situations where objects
cannot always be clearly identified.
R
If pedestrians, cyclists or vehicles move
quickly into the sensor detection range.
R
If road users are hidden by other objects or
are located close to other objects.
R
If the typical outline of a pedestrian or cyclist
cannot be distinguished from the back‐
ground.
R
If a pedestrian or cyclist is not detected as
such, e.g. due to special clothing or other
objects.
R
If the driver's seat belt is not fastened.
R
On curves with a tight radius.
% The Active Brake Assist sensors adjust auto‐
matically while a certain distance is being
driven after the vehicle has been delivered.
Active Brake Assist is unavailable or only
partially available during the teach-in proc‐
ess.
Setting Active Brake Assist
Requirements:
R
The ignition is switched on.
Multimedia system:
4
©
5
Settings
5
Assistance
5
Avoid collision
5
Active Brake Assist
#
Select the desired setting.
The setting is retained when the engine is
next started.
240 Driving and parking