Mercedes-Benz S-Class Coupe 2018, Руководство оператора

Страница: 333 / 502

% If, after the car wash, you remove the wax
from the windshield and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Information on using a high-pressure cleaner
&
WARNING Risk of accident when using
high-pressure cleaning equipment with
round-spray nozzles
The water jet from a round-spray nozzle (dirt
grinder) may cause damage to tires and sus‐
pension components that is not visible.
Components damaged in this way may fail
unexpectedly.
#
Do not use high-pressure cleaning
equipment with round-spray nozzles to
clean your vehicle.
#
Damaged tires or suspension compo‐
nents must be replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a high-pressure cleaner:
R
Keep the SmartKey at least 10 ft (3 m) away
from the vehicle. Otherwise the trunk lid
could open unintentionally.
R
Maintain a distance of at least 11.8 in
(30 cm) to the vehicle.
R
Vehicles with decorative foil: parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 27.6 in
(70 cm) between the foil-covered parts of the
vehicle and the nozzle of the high pressure
cleaner. Move the high-pressure cleaner noz‐
zle around whilst cleaning.
R
Observe the information on the correct dis‐
tance in the equipment manufacturer's oper‐
ating instructions.
R
Do not point the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tires, the soft top, the wind deflector net,
slits, electrical component parts, batteries,
light sources and ventilation slots.
Washing the vehicle by hand
Observe the legal requirements, e.g. in a number
of countries, washing by hand is only permitted
in specially designated wash bays.
#
Use a mild cleaning agent, e.g. car shampoo.
#
Wash the vehicle with lukewarm water using
a soft car sponge. When doing so, do not
expose the vehicle to direct sunlight.
#
Carefully hose the vehicle off with water and
dry using a chamois. Take care not to point
the water jet directly towards the air inlet
grille.
Maintenance and care 331