Mercedes-Benz S-Class 2020, Руководство пользователя

Страница: 406 / 621

change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shift the transmission to position j .
#
Vehicles with level control system: set the
normal vehicle level (
/
page 269).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Remove the hub cap if necessary
(
/
page 403).
#
Raise the vehicle (
/
page 403).
Removing and fitting the wheel trim/hub
caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 402).
Aluminium hub cap
#
To remove: position socket 2 from the tyre-
change tool kit on hub cap 1 .
#
Position wheel spanner 3 on socket 2 .
#
Using wheel spanner 3 , turn hub cap 1
anti-clockwise and remove it.
#
To fit: follow the instructions above in
reverse order.
% Specified tightening torque: 25 Nm.
Raising the vehicle when changing a wheel
Requirements:
R
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
change (
/
page 402).
R
The hub caps have been removed
(
/
page 403).
Important notes on using the jack:
R
Use only a vehicle-specific jack that has
been approved by Mercedes-Benz to raise
the vehicle.
R
The jack is only designed for raising and
holding the vehicle for a short time while a
wheel is being changed and not for mainte‐
nance work under the vehicle.
R
The jack must be placed on a firm, flat and
non-slip surface.
Wheels and tyres 403