Mercedes-Benz S 320 1999, Руководство пользователя

Страница: 116 / 169

10. Clean contact surfaces of
wheel and wheel hub. Install
spare wheel on wheel hub.
Insert wheel bolts and tighten
them slightly.
To avoid paint damage, place
wheel flat against hub and hold
it there while installing first
wheel bolt.
Unscrew the alignment bolt (1)
to install the last wheel bolt.
11. Lower car. Remove jack and
insert jack tube cover.
Before storing the jack, the jack
arm must be lowered almost to the
base of the jack.
Warning!
Always replace wheel bolts
that are damaged or rusted.
Never apply oil or grease to
wheel bolts.
Damaged wheel hub threads
should be repaired
immediately.
Incorrect mounting bolts or
improperly tightened
mounting bolts can cause the
wheel to come off. This could
cause an accident. Be sure to
use the correct mounting
bolts.
12. Using the wrench, tighten the
five bolts evenly, following the
sequence illustrated above,
until all bolts are tight.
Observe a tightening torque
of 110ft.lb. (150 Nm).
13. Ensure proper tire pressure.
114