Mercedes-Benz S 320 1999, Руководство пользователя

Страница: 115 / 169

4. Remove lug wrench (1) and
extension (2) from tool kit and
assemble. Loosen but do not
yet remove the wheel bolts.
5. Remove the protective cover
from the jack support tube
opening by inserting the screw­
driver in the opening and prying
it out.
The tube openings are located
directly behind the front wheel
housings and in front of the rear
wheel housings.
6. Insert jack arm fully into the tube
hole up to the stop. Place jack
on firm ground. Position the jack
so that it is always vertical
(plumb-line) as seen from the
side (see arrow), even if the
vehicle is parked on an incline.
Remove wheel. Grip wheel from
the sides. Keep hands from
beneath the wheels.
7.
8
.
Jack up the vehicle until the
wheel is clear of the ground.
Never start engine while vehicle
is raised.
Unscrew upper-m ost wheel bolt
and install alignm ent bolt (1)
supplied in the tool kit. Remove
the remaining bolts. Keep bolt
threads protected from dirt and
sand.
113
P
ra
c
ti
c
a
l
H
in
ts