Mercedes-Benz ML 320 BlueTEC, Руководство оператора

Страница: 259 / 424

Tires and wheels
257
replacing one or more tires or wheels on
your vehicle to ensure that the replacement
or alternate tires and wheels allow the
TPMS to continue to function properly.
i If a condition causing the TPMS to
malfunction develops, it may take up to
10 minutes for the system to signal a
malfunction using the TPMS telltale
flashing and illumination sequence.
The telltale extinguishes after a few
minutes driving if the malfunction has been
corrected.
i Operating radio transmission equipment
(e.g. wireless headsets, two-way radios) in
or near the vehicle could cause the TPMS
to malfunction.
i This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any
interference received, including
interference that may cause undesired.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
Tire inflation pressure warnings
If the system detects a significant loss of tire
inflation pressure in one or more than one
tire, a message appears in the multifunction
display and a warning signal sounds.
Example illustration
Restarting the TPMS
G
Warning!
It is the driver’s responsibility to set the
reference values to the recommended cold
tire inflation pressure. Underinflated tires
affect the ability to steer or brake the
vehicle. You might lose control over the
vehicle.
When you restart the TPMS, the system sets
new reference values for each tire.
The TPMS must be restarted when you have
adjusted the tire inflation pressure to a new
level (e.g. because of different load or driving
conditions). The TPMS is then recalibrated to
the current tire inflation pressures.
Restart the TPMS after adjusting the tire
inflation pressure to the inflation pressure
recommended for the vehicle operating
condition. Tire pressure should only be
adjusted on cold tires. Observe the
recommended tire inflation pressure on the
Tire and Loading Information placard on the
driver’s door B-pillar. Some vehicles may have
supplemental tire pressure information for
driving at high speeds or for vehicle loads less
than the maximum loaded vehicle condition.
If such information is provided, it can be
found on the inside of the fuel filler flap.
X
Using the Tire and Loading Information
placard on the driver’s door B-pillar
(
Y
page 247) or, if available, the
supplemental tire inflation pressure
information on the inside of the fuel filler
flap (
Y
page 237), make sure the tire
inflation pressure of all four tires is correct.
X
Switch on the ignition.
X
Press button
è
or
ÿ
on the
multifunction steering wheel repeatedly
Operation
Z