Mercedes-Benz ML 320 BlueTEC, Руководство оператора

Страница: 102 / 424

Seats
100
X
Curvature position: Use button
1
to
move the curvature up and button
3
to
move it down.
X
Degree of curvature: Use button
2
to
lessen the curvature and button
4
to
increase it.
Rear seat head restraints
G
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will
reduce the potential for injury to the head
and neck in the event of an accident or
similar situation.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the
occupant adjust the head restraint
properly.
Do not drive the vehicle without the seat
head restraints installed when the rear
seats are occupied. Head restraints are
intended to help reduce injuries during an
accident.
G
Warning!
Make sure the rear seat head restraints
engage when placing them upright
manually. Otherwise their protective
function cannot be ensured.
The back of the head will not be supported
in the event of a collision. That could cause
serious or even fatal injuries. Rear seat
occupants can be seriously injured or
killed.
Head restraint height
1
Head restraint
2
Release button
X
Raising: Pull head restraint
1
upward to
the desired position.
X
Lowering: Press release button
2
and
push down on head restraint
1
.
Head restraint fore and aft adjustment
X While seated, reach behind you with both
hands and find lower edge of the head
restraint.
X
Adjust the head restraint to the desired
position by pushing or pulling on the lower
edge of the head restraint cushion.
Controls in detail