Mercedes-Benz M 447 hLAG, Руководство по обслуживанию

Страница: 54 / 83

Diagnose
Status September 2003 (EvoBus-Service / AFT) Page: 54 of 83
4 Diagnosis
4.1 Reading measured values
The following table contains the measured values available for Customer Service via Star diagnosis and
via the on-board diagnosis.
No. Process Variable Resolution Unit
1 Target engine torque (FR) 1.00 Nm
2 Maximum current engine torque 1.00 Nm
3 Actual engine torque (MR) 1.00 Nm
4 Gas injection angle (Cylinder 1) 0.10 °Cranksh.
5 Angle of start of gas injection (Cylinder 1) 0.10 °Cranksh.
before TDC.
6 Current target control speed 1.00 rpm
7 Current final limit speed 1.00 rpm
8 Control-speed target value (FR) 1.00 rpm
9 Redundant speed (Ter. W) (FR) 1.00 rpm
10 Engine speed 1.00 rpm
11 Exhaust-gas temperature 1.00 °C
12 Vehicle speed (FR) 1.00 km/h
13 Coolant temperature 1.00 °C
14 Gas temperature 1.00 °C
15 Gas pressure 1.00 mbar
16 Oil level 0.10 l
17 Oil temperature 1.00 °C
18 Charge-air temperature 1.00 °C
19 Boost pressure 1.00 mbar
20 Atmospheric pressure 1.00 mbar
21 Oil pressure 1.00 mbar
22 Throttle-valve target position 0.10 °Th. valve
23 Throttle-valve actual position 0.10 °Th. valve
24 Lambda target value 0.01 -
25 Lambda actual value 0.01 -
26 Lambda-probe heating current 1.00 mA
27 Lambda correction factor 0.01 -
28 Air mass 1.00 mg/stroke
29 Gas mass 0.10 mg/stroke
30 Firing angle (Cylinder 1) 0.10 °Cranksh.
before TDC
31 Turbocharger pulse duty factor 0.10 %
32 Battery voltage 1.00 mV