Mercedes-Benz GLK 300 4MATIC 2012, Руководство пользователя

Страница: 190 / 381

Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary
R
the engine is running or if it has been auto-
matically switched off by the ECO start/
stop function.
R
the driver's door is closed or if your seat
belt is fastened.
R
the parking brake is released.
R
the bonnet is closed
R
the selector lever is in position D, R or N on
vehicles with automatic transmission.
R
DISTRONIC PLUS is deactivated.
Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
until ë appears in the multifunction dis-
play.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
G
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Deactivating the HOLD function
The HOLD function is deactivated automati-
cally if:
R
you accelerate. On vehicles with automatic
transmission: only when the transmission
is in position D or R.
R
the transmission is in position P on vehicles
with automatic transmission.
R
you depress the brake pedal again with a
certain amount of pressure until ë dis-
appears from the multifunction display.
R
you activate DISTRONIC PLUS.
G
WARNING
Never get out of the vehicle when the HOLD
function is activated.
The HOLD function must never be operated
or deactivated by a passenger or from outside
the vehicle.
The HOLD function does not replace the park-
ing brake and must not be used for parking.
The braking effect of the HOLD function is
cancelled and the vehicle could roll away if:
R
the HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal.
R
there is a malfunction in the system or an
interruption in the power supply, e.g. bat-
tery failure.
R
the electrical system in the engine com-
partment, the battery or the fuses are tam-
pered with.
R
the battery is disconnected.
If you leave the vehicle or park it, deactivate
the HOLD function and secure the vehicle
against rolling away.
R
the driver's door is open and the driver's
seat belt is unfastened.
R
the engine is switched off, unless it is auto-
matically switched off by the ECO start/
stop function.
R
the bonnet is opened.
R
a system fault occurs.
R
the power supply is not sufficient.
In vehicles with manual transmission, you see
a warning message in the multifunction dis-
play if the HOLD function is activated and:
Driving systems
187
Driv
ing
and
pa
rki
ng
Z