Mercedes-Benz GLK 250 BlueTEC, Руководство оператора

Страница: 199 / 382

:
Ball coupling
;
Red guide line at a distance of
approximately 12 in (0.30 m) from the ball
coupling
=
Trailer drawbar marker assistant
?
Trailer drawbar
A
Symbol for the "Coupling up a trailer"
function
X
Select symbol A using the COMAND
controller, see COMAND.
The "Coupling up a trailer" function is
selected. The distance specifications now
only apply to objects that are at the same
level as the ball coupling.
X
Reverse carefully, making sure that trailer
drawbar marker assistant = points
approximately in the direction of trailer
drawbar ? .
X
Reverse carefully until the trailer
drawbar ? reaches red guide line ; .
X
Couple up the trailer (
Y
page 212).
360° camera
General notes
The 360° camera is a system consisting of
four cameras.
The system analyzes images from the
following cameras:
R
Rear view camera
R
Front camera
R
Two cameras in the exterior rear view
mirrors
The cameras capture the immediate
surroundings of the vehicle. The system
supports you, e.g. when parking or if vision is
restricted at an exit.
The 360° camera images can be shown in full
screen mode or in seven different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
The seven split-screen views are:
R
top view and picture from the rear view
camera (130° viewing angle)
R
top view and picture from the front camera
(without displaying the maximum steering
wheel angle)
R
top view and enlarged rear view
R
top view and enlarged front view
R
top view and trailer view (vehicles with
trailer tow hitch)
R
top view and pictures from the rearward
facing mirror cameras (rear wheel view)
R
top view and pictures from the forward
facing mirror cameras (front wheel view)
i
The top view and trailer view are available
for vehicles equipped with a trailer tow
hitch.
When the function is active and you shift the
transmission from position D or R to N, you
see the previous view in the COMAND
display. The dynamic guidelines are hidden.
When you change between transmission
positions D and R, you see the previously
selected front or rear view.
Important safety notes
The 360° camera is only an aid. It is not a
replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and
parking. When maneuvering or parking, make
sure that there are no persons, animals or
objects in the area in which you are
maneuvering.
Driving systems
197
Driv
ing
and
parking
Z