Mercedes-Benz GLK 250 BlueTEC, Руководство оператора

Страница: 103 / 382

i
You can store the seat settings using the
memory function (
Y
page 109).
Adjusting the head restraints
G
WARNING
You could lose control of your vehicle if you
do the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint,
steering wheel and mirror and fasten your
seat belt before starting the engine.
G
WARNING
If head restraints are not installed and
adjusted correctly, they cannot provide
protection as intended. There is an increased
risk of injury in the head and neck area, e.g.
in the event of an accident or when braking.
Always drive with the head restraints
installed. Before driving off, make sure for
every vehicle occupant that the center of the
head restraint supports the back of the head
at about eye level.
General notes
Pay attention to the important safety notes
(
Y
page 99).
Do not rotate the head restraints of the front
and rear seats. Otherwise, you cannot adjust
the height and angle of the head restraints to
the correct position.
Adjusting the head restraints manually
Adjusting the head restraint height
5
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : in the
direction of the arrow and push the head
restraint down to the desired position.
Adjusting the angle of the head restraints
X
Push or pull the lower edge of the head
restraint in the direction of the arrow.
Adjusting the height of the head
restraints electrically
X
To adjust the head restraint height: slide
the switch for head restraint adjustment
(
Y
page 100) up or down in the direction of
the arrow.
5 For vehicles without memory function only.
Seats
101
Seats,
steering
wheel
and
mirrors
Z