Mercedes-Benz G 550, Руководство оператора

Страница: 93 / 288

X
If you see the Turn off lights or
remove key
message in the multifunction
display, remove the SmartKey from the
ignition lock.
or
X
Turn the light switch to
$
or
Ã
.
Low-beam headlamps
X
To switch on: turn the SmartKey to
position 2 in the ignition lock or start the
engine.
X
Turn the light switch to
L
.
The
L
indicator lamp in the instrument
cluster lights up.
X
To switch off: turn the light switch to
$
.
Daytime running lamps
Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.
X
Turn the light switch to
$
or
Ã
.
When the engine is running: depending on
the ambient light, the low-beam headlamps
or the parking lamps are switched on.
When the low-beam headlamps are
switched on, the
L
indicator lamp in the
instrument cluster lights up.
If the light switch is set to
$
or
Ã
, you
cannot activate the high-beam headlamps.
However, the high-beam flasher can always
be used. Turn the light switch to
L
when
driving at night. You can switch on the high-
beam headlamps in this position.
When the engine is running and the vehicle is
stationary: if you move the selector lever from
a driving position to
N or P, the low-beam
headlamps go out after three minutes.
When the engine is running: if you turn the
light switch to
T
, you turn on the parking
lamps and low-beam headlamps.
When the engine is running: if you turn the
light switch to
L
, the manual settings take
precedence over the daytime running lamps.
Daytime running lamps in the USA
In the USA, the daytime running lamps are
deactivated upon delivery from the factory.
X
To switch on: activate the daytime
running lamps function in the on-board
computer (
Y
page 164).
X
Turn the light switch to
$
or
Ã
.
When the engine is on: the low-beam
headlamps are switched on. The
L
indicator lamp in the instrument cluster
lights up.
If the light switch is set to
$
or
Ã
, you
cannot switch on the high-beam headlamps
in bright conditions. Turn the light switch to
L
. You can switch on the high-beam
headlamps in this position.
If the light switch is set to
$
,
Ã
or
L
, you can switch on the high-beam
headlamps in less bright conditions.
However, the high-beam flasher can always
be used.
Turn the light switch to
L
when driving at
night.
When the engine is running: if you turn the
light switch to
T
or
L
, the manual
settings take precedence over the daytime
running lamps.
Automatic headlamp mode
G
Warning
If the exterior lamp switch is set to
Ã
, the
headlamps will not automatically come on
under foggy conditions.
To minimize risk to you and to others, activate
headlamps by turning exterior lamp switch to
L
when traffic and/or ambient lighting
conditions require you to do so.
In low ambient lighting conditions, only switch
from position
Ã
to
L
with the vehicle
at a standstill in a safe location. Switching
Exterior lighting
91
Lights and windshield wipers
Z