Mercedes-Benz G 550, Руководство оператора

Страница: 103 / 288

=
Turn signals
?
Brake/tail lamp
A
Tail lamp/standing lamp
X
Turn the bulb counter-clockwise, applying
slight pressure, and remove it from bulb
holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
!
When installing the lens, make sure that
the seal is positioned correctly.
X
Install lens
;
.
X
Tighten screws
:
.
! Do not fasten the screws too tightly. You
could otherwise damage the lens.
X
G 55 AMG: secure the headlamp
protection grille (
Y
page 100).
Backup lamp/rear fog lamp
Rear fog lamp (example)
X
Switch off the lights.
X
Remove screws
:
.
X
Remove lens
;
.
X
Turn the bulb
=
counter-clockwise,
applying slight pressure, and remove it
from the bulb holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
X
Install lens
;
.
X
Tighten screws
:
.
! Do not fasten the screws too tightly. You
could otherwise damage the lens.
Windshield wipers
Important safety notes
G
Warning!
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windows will not be wiped
properly. As a result, you may not be able to
observe surrounding traffic conditions and
could cause an accident.
! Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield/rear
window can scratch the glass if wiping
takes place when the windshield/rear
window is dry.
Windshield wipers
101
Lights and windshield wipers
Z