▌
Switching Highbeam Assist on/off
Requirements:
R
The light switch is in the
Ã
position.
#
To switch on: switch on high beam using the
combination switch.
When the high beam is switched on automati-
cally in the dark, the
_
indicator lamp will
light up on the instrument cluster display.
#
To switch off: switch off high beam using the
combination switch.
Adaptive Highbeam Assist Plus
▌
Adaptive Highbeam Assist Plus function
&
WARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Adaptive Highbeam Assist Plus does not react
to:
R
road users without lights, e.g. pedestrians
R
road users with poor lighting, e.g. cyclists
R
road users whose lighting is obstructed,
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
Assist Plus may fail to recognise other road
users with their own lighting, or may recognise
them too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users.
#
Always observe the road and traffic con-
ditions carefully and switch off the high
beam in good time.
Adaptive Highbeam Assist Plus cannot take into
account road, weather or traffic conditions.
Detection may be restricted in the following cases:
R
In poor visibility, e.g. fog, heavy rain or snow
R
if there is dirt on the sensors or the sensors
are obscured
Adaptive Highbeam Assist Plus is only an aid. You
are responsible for ensuring correct vehicle light-
ing in accordance with the prevailing light, visibility
and traffic conditions.
Adaptive Highbeam Assist Plus switches automati-
cally between the following light types:
R
Low beam
R
Partial high beam
R
High beam
Partial high beam uses high beam to shine past
other road users rather than dazzling them. The
low beam illumination area covers the vehicle in
front.
At speeds lower than 25 km/h or if there is insuffi-
cient street lighting, Highbeam Assist Plus will per-
form the following actions:
R
Partial high beam and high beam will be auto-
matically deactivated.
R
The
K
indicator lamp on the instrument
cluster will go out. The
_
symbol for High-
beam Assist Plus will remain switched on.
At speeds greater than 30 km/h, Highbeam Assist
Plus will perform the following actions:
R
If no other road users are detected, high beam
will be switched on.
R
If other road users are detected, partial high
beam will be switched on.
R
The
K
indicator lamp on the instrument
cluster will light up.
At speeds greater than 40 km/h, Highbeam Assist
Plus will perform the following actions:
R
If no other road users are detected and the
road is straight, high beam will be switched on.
R
If highly reflective signs are detected, high
beam will automatically be switched off.
108 Light and vision
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...