Mercedes-Benz EQS 2022, Руководство оператора

Страница: 215 / 538

%
The remote control for the door drive is not
included in the scope of delivery of the garage
door opener.
Sync Synchr hronizing t onizing the r he rolling code olling code
RReq equir uirements: ements:
R
The door system uses a rolling code.
R
The vehicle must be within range of the garage
door or door drive.
R
The vehicle as well as persons and objects are
located outside the range of movement of the
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button 1 , 2
or 3 repeatedly until the door closes.
When the door closes, programming is com-
pleted.
%
Please also read the operating instructions for
the door drive.
TTrroubleshoo oubleshooting when pr ting when progr ogramming t amming the r he remote emote
contr control ol
#
Check if the transmitter frequency of remote
control 5 is supported.
#
Replace the batteries in remote control 5 .
#
Hold remote control 5 at various angles from
a distance of 0.4 in (1 cm) to 3 in (8 cm) front
of the inside rearview mirror. You should test
every position for at least 25 seconds before
trying another position.
#
Hold remote control 5 at the same angles at
various distances in front of the inside rear-
view mirror. You should test every position for
at least 25 seconds before trying another
position.
#
On remote controls that transmit only for a
limited period, press button 6 on remote
control 5 again before transmission ends.
#
Angle the antenna line of the garage door
opener unit towards the remote control.
%
It is possible that older garage doors cannot
be operated using the remote control in the
inside rearview mirror even a er you have
successfully performed the measures descri-
bed above. If this is the case, contact the
HomeLink ® Hotline.
%
Support and additional information on pro-
gramming:
R On the toll free HomeLink
®
Hotline on
1-800-355-3515
R
On the Internet at https://
www.homelink.com/mercedes
Opening or closing t Opening or closing the g he gar arag age door e door
RReq equir uirements: ements:
R
The corresponding button is programmed to
operate the door.
#
Press and hold buttons 1 , 2 or 3 until the
door opens or closes.
#
If indicator lamp 4 ashes yellow a er
approximately 20 seconds: press and hold the
previously pressed button again until the door
opens or closes.
Clear Clearing t ing the g he gar arag age door opener memory e door opener memory
#
Press and hold buttons 1 and 3 .
Indicator lamp 4 lights up yellow.
Driving and parking 213 213
www.carobook.com