Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 395 / 541

R
The vehicle is on solid, non-slippery and level
ground.
R
The required tyre-change tool kit is available.
%
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with manual transmission: engage
first or reverse gear.
#
Vehicles with automatic transmission: shift to
position
j
.
#
Switch off the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
#
If necessary, remove the wheel trim/hub caps
(
/
page 392).
#
Raise the vehicle (
/
page 392).
Removing and fitting the wheel trim/hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 391).
Wheel trim
The wheel trim covers the wheel bolts on vehicles
with steel wheels. Before unscrewing the wheel
bolts, remove the wheel trim.
#
To remove: using both hands, carefully reach
into two wheel trim openings and remove the
wheel trim.
Plastic hub cap
#
To remove: turn the centre cover of the hub
cap anti-clockwise and remove the hub cap.
#
To fit: make sure that the centre cover of the
hub cap is turned anti-clockwise.
#
Position the hub cap and turn the centre cover
clockwise until the hub cap engages physically
and audibly.
Raising the vehicle when changing a wheel
Requirements:
R
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
change (
/
page 391).
R
The wheel trims and hub caps have been
removed (
/
page 392).
Important notes on using the jack:
R
Use only a vehicle-specific jack that has been
approved by Mercedes-Benz to raise the vehi-
cle.
R
The jack is only designed for raising and hold-
ing the vehicle for a short time while a wheel
392 Wheels and tyres