Mercedes-Benz E-Class Coupe, Руководство оператора

Страница: 112 / 486

Switching on the high beam manually
#
Vehicles with Adaptive Highbeam Assist:
Turn the light switch to the L position.
R
Press the combination switch beyond the
pressure point in the direction of
arrow 1 .
When the high beam is activated, the indicator
lamp for low beam is deactivated and replaced
by the indicator lamp for the high beam.
#
To switch off the high beam: move the
combination switch back to its starting posi‐
tion.
#
To indicate briefly: press the combination
switch briefly up to the pressure point in the
direction of arrow 2 or 4 .
The corresponding turn signal light flashes
three times.
#
To indicate for a duration: press the combi‐
nation switch beyond the pressure point in
the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
light
#
Press button 1 .
Cornering light
Cornering light function
Cornering light improves the illumination of the
road over a wide angle in the turning direction,
enabling better visibility in tight bends, for exam‐
ple. It can only be activated when the low beam
is switched on.
The function is active:
R
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned.
110 Light and visibility