Mercedes-Benz E-Class 2011, Руководство пользователя

Страница: 345 / 409

If you come into contact with the tyre sealant,
observe the following:
R
Rinse off the tyre sealant from your skin
immediately with water.
R
If the tyre sealant comes into contact with
your eyes, immediately rinse them thor-
oughly with clean water.
R
If tyre sealant is swallowed, immediately
rinse your mouth out thoroughly and drink
plenty of water. Do not induce vomiting,
and seek medical attention immediately.
R
Immediately change out of clothing which
has come into contact with tyre sealant.
R
If an allergic reaction occurs, seek medical
attention immediately.
i
If tyre sealant leaks out, allow it to dry. It
can then be removed like a layer of film.
If you get tyre sealant on your clothing,
have it cleaned as soon as possible with
perchloroethylene.
X
Pull plug ? with the cable and hose A out
of the housing.
X
Screw hose A onto flange B of tyre seal-
ant bottle : .
X
Place tyre sealant bottle : head down-
wards into recess ; of the tyre inflation
compressor.
X
Remove the cap from valve C on the faulty
tyre.
X
Screw filler hose D onto valve C .
X
Insert plug ? into the cigarette lighter
socket (
Y
page 311) or into a 12 V socket
in your vehicle (
Y
page 311).
X
Turn the key to position 1(
Y
page 155) in
the ignition lock.
X
Press on/off switch = on the tyre inflation
compressor to I.
The tyre inflation compressor is switched
on. The tyre is inflated.
i
First, tyre sealant is pumped into the tyre.
The pressure can briefly rise to approx-
imately 500 kPa (5 bar, 73 psi).
Do not switch off the tyre inflation com-
pressor during this phase.
X
Let the tyre inflation compressor run for
five minutes. The tyre should then have
attained a pressure of at least 180 kPa
(1.8 bar, 26 psi).
!
Do not operate the tyre inflation com-
pressor for longer than eight minutes at a
time without a break. It may otherwise
overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
If a pressure of 180 kPa (1.8 bar, 26 psi) has
been achieved after five minutes, see
(
Y
page 343).
If a pressure of 180 kPa (1.8 bar, 26 psi) has
not been achieved after five minutes, see
(
Y
page 343).
342
Flat tyre
Breakd
own
assist
ance