Mercedes-Benz E 350 BlueEFFICIENCY Cabriolet, Руководство оператора

Страница: 119 / 372

You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
X
Make sure that the vehicle is stationary and
that the SmartKey is in position
2 in the
ignition lock.
X
Press button
;
for the exterior mirror on
the front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button
=
to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button
M
?
.
X
Make sure that the SmartKey is in
position
2 in the ignition lock.
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button
=
to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
X
Press memory button M
?
and one of the
arrows on adjustment button
=
within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Adjust the exterior mirror on the front-
passenger side using button
;
.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button
:
for the exterior
mirror on the driver's side
Memory function
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
driver's side: steering wheel position
R
driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
Memory function
117
Seats, steering wheel and mirrors
Z