Mercedes-Benz COMAND, Руководство по эксплуатации

Страница: 153 / 298

X
Search for a contact on the mobile phone
d (
Y
page 148).
X
To select G : slide 9 the controller.
X
To select Save Save : turn and press the control-
ler.
The contact has now been saved. The con-
tact is identified by the ¥ symbol in the
phone book.
i
Saved contacts are also displayed in the
address book.
Saving or editing the contact data on
COMAND does not change the contacts on
the mobile phone. If automatic calling up of
phone contacts is activated, COMAND dis-
plays the copy ¥ with the changed data.
Deleting the contact
You can delete contacts that have been
added, supplemented, saved or imported in
COMAND.
If there are one or several phone numbers
saved under the contact, the contact is
deleted from the phone book and the address
book.
If there are additional entries under the con-
tact, such as a navigable destination, only the
phone numbers are deleted. The contact is
retained in the address book with the remain-
ing entries.
X
To highlight a contact in the phone book:
turn the controller.
X
To select G : slide 9 the controller.
X
To select Delete Contacts Delete Contacts : turn and
press the controller.
A prompt appears asking whether the con-
tact should be deleted.
X
To select Yes Yes : turn and press the controller.
The phone number is deleted.
or
X
To select No No : turn and press the controller.
The process is canceled.
Closing the phone book
X
To select & from the character bar: turn
the controller and press to confirm.
or
X
Press the % button.
Call lists
Introduction
If your mobile phone supports the PBAP Blue-
tooth
®
profile, the call lists from the mobile
phone are displayed in COMAND.
If your mobile phone does not support the
PBAP Bluetooth
®
profile, COMAND will
attempt to display the mobile phone call lists
using alternative methods. If the mobile
phone call lists cannot be displayed,
COMAND generates its own call lists. These
are not the same as the call lists in your
mobile phone.
The Call list option is not available unless a
mobile phone is connected to COMAND.
If the contact for an incoming call is not saved
in the address book, you can use the call list
to save the telephone number. You can save
this telephone number as a new contact in the
address book or add it to an existing contact
(
Y
page 152).
i
If you connect a different mobile phone to
COMAND, the call lists from the new mobile
phone are displayed.
Call lists
151
Tel
epho
ne
Z